Industrial Lighting & Lasers

445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science

445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science
445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science
445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science
445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science
445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science
445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science
445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science
445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science
445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science
445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science

445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science   445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science
OEM Visible Diode Laser Assembly. 4.724" L x 3.071" W (119.99mm x 78.00mm). Protrudes from near rear 1.25. Emissions Indicator & FDA Key-switch. Beam at aperture: 1mm x 3mm, Divergence <2mRad.

Adjustable single element AR coated Glass lens (Friction Focus adapter included). Highest output power for wavelength. EXTRA___0-5VDC Modulation / TTL to 150KHz (BNC Input see below).

Wavelength - 445nm , Multimodal, elliptical beam. Power Source 120/240VAC - separate wall AC power required for operation.

638nm 700mW (Both CW & Modulated). 450nm to 8W (Both CW & Modulated). 462nm to 2W (Both CW & Modulated).

520nm to 1.5W (Both CW & Modulated). 808nm to 3W (Both CW & Modulated). CUSTOM, your laser diode or specs.

Laser Diode Power Supplies / Drivers to 6A. Bare Laser Diodes: 635nm to 900nm.

Made in USA by Visible Diode Lasers LLC. Each and every one of our Lasers & Optical Systems are built custom here in the USA with high grade T6061 Aluminum alloy, High reliability Laser Diode Power supply / controller. Each system is tested with Ophir Laser power meter and function generators (when applicable with Modulation).

Our optics are AR coated to the proper wavelength and are fully adjustable for precision focus. THESE LASERS ARE NOT"LASER POINTERS" AND CAN NOT BE MODIFIED TO BE SO.

THEY RUN ON 120vac ELECTRIC POWER, NOT BATTERIES. THEY ARE MEANT FOR MOUNTING INSIDE LIGHT SHOW EQUIPMENT, SCIENTIFIC EQUIPMENT, INDUSTRIAL SYSTEMS AND MEDICAL DEVICES.

THEY CAN NOT BE RUN ON BATTERIES AND ARE NOT HAND HELD. Prior to or Following checkout. TEC Cooling / Microprocessor Controlled with 128x64 OLED display, Full PWM control of TEC/Fan Subsystem.

Display indicates Laser assembly Temperature / Approximate Output Power. Other options include but not limited to. USB control of Output / Modulation.

Custom Visible / Infrared / UV power / Wavelengths. This laser is not a complete unit and must not be treated as such. It does not comply with FDA/CDRH regulations regarding complete laser systems. You are over 18 years of age.

And will follow all FDA/CDRH regulations / precautions. Each of our OEM Lasers is custom BUILT here in the USA. Each laser is constructed from high quality components and assembled in a static free environment. We assemble to specifications which may vary from customer to customer and have a standard "burn-in" time.

Some laser orders may have extended lead-times due to component delays. You understand that these laser components that are mentioned above are dangerous when not properly assembled into a finished product. You will use these components as an OEM product and properly incorporate them into a finished product. You will use these laser diode modules / OEM housings in a safe and responsible manner and for a legal purpose.

You are legally responsible for the use of these components, improper use of these components or their end products. You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.

You Accept this Laser as an OEM COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES This Laser Subsystem and is designed solely as an OEM component for incorporation into the customer's end products. Therefore, this laser does not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. If there are any problems, we strive to repair any problems. We promise we can make you happy if you give us a fair chance.

NOTE Some photos show lasers with different outputs on the NON INCLUDED OLED screens. We can be reached at 321 212 9075. The item "445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science" is in sale since Wednesday, December 18, 2013. This item is in the category "Business & Industrial\Healthcare, Lab & Life Science\Lab Equipment\Lab Lasers & Photonics". The seller is "visiblediodelasers" and is located in Cocoa, Florida. This item can be shipped worldwide.
  • Brand: Visible DIode Lasers llc
  • Model: 4504_5
  • Country/Region of Manufacture: United States

445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science   445nm NEW 4.5 Watt CW OEM Blue Laser CNC Milling, DMX, ILDA Science